Introduction; Product Description; Intended Use; Symbols - Meec Tools 009875 Bedienungsanleitung

Table of contents
1 Introduction
1.1 Product description ............................................................33
1.2 Intended use .........................................................................33
1.3 Symbols ..................................................................................33
1.4 Product overview ...............................................................34
2 Safety
2.1 Safety definitions ................................................................34
2.2 Safety instructions for operation ...............................34
2.3 Safety devices on the product ...................................35
3 Assembly
3.1 To assemble the product ................................................35
4 Operation
4.1 To connect the product to a power source ...........36
4.2 To connect the product to a water source ...........36
4.3 To start the product .........................................................36
4.4 To disengage and engage the trigger lockout .... 37
4.5 To remove air from the system ................................... 37
4.6 To operate the product ................................................... 37
4.7 To change spray mode.................................................... 37
4.8 To stop the product .......................................................... 37
5 Maintenance
5.1 To clean the base unit ......................................................38
5.2 To clean the filter ...............................................................38
5.3 To clean the spray head nozzle ..................................38
6 Transport
6.1 To transport the product by hand ..............................38
6.2 To transport the product with a vehicle .................38
7 Storage
7.1 To put the product in storage ........................................39
8 Disposal
8.1 To discard the product .....................................................39
9 Troubleshooting
10 Technical data
10.1 Specifications for approved extension cords ......41
33
1

Introduction

1.1 Product description

33
The product is a high pressure washer.

1.2 Intended use

The product is intended to be used for high-pressure
washing of, for example, cars and boats.
34

1.3 Symbols

Read the operating instructions carefully
and make sure that you understand the
instructions before you use the product.
Save the instructions for future reference.
35
Safety class II.
36
Sound power level. Refer to "10 Technical
data" on page 41.
Do not connect the product to a drinking
water supply without a check valve.
Keep a safety distance of at least 15 m to
the product.
38
This product complies with applicable EU
directives and regulations.
38
Recycle as electrical waste.
39
39
40
41
2022_001