Storage And Maintenance; Troubleshooting - Bluetti EP500 Bedienungsanleitung

Just Power On

13. Storage and Maintenance

• Please turn off the unit and charge it to 50-70% of capacity before storing.
• To help preserve battery health, please discharge and fully charge the unit at
least once every 6 months.
• Ensure proper ventilation when in use or in storage.
• Keep unit away from any combustible materials or gases. (32-113
clean and dry environment is strongly recommended.
• Dry, non-abrasive cloths to clean the exterior from dust and debris every so often
is highly recommended.
• Keep the unit away from children and pets.
• Do not stack anything on the top of the unit while in use or in storage.
• Avoid exposing the unit to rainy or wet environment and in direct sunlight.

14. Troubleshooting

Error
Error List
Code
001 PV Over Voltage
005 Grid Over Voltage
006 Grid Low Voltage
007 Grid Over Frequency
008 Grid Low Frequency
009 Generator Over Voltage
010 Generator Low Voltage
012 Inverter Over-load
USB/TYPE-C/PD High
018
Current
Troubleshooting
Please check if the open circuit voltage of solar
panels exceeds the input voltage standard of EP500.
Please check whether the grid voltage fits the input
voltage standard of EP500.
Please check whether the grid voltage fits the input
voltage standard of EP500.
Please check whether the grid frequency fits the
input frequency of EP500.
Please check whether the grid frequency fits the
input frequency of EP500.
Please check whether the output voltage of
generator fits the input frequency of EP500.
Please check whether the output voltage of
generator fits the input frequency of EP500.
The output power of load exceeds.
Please disconnect the appliances on USB ports.
Clear the alarm history or restart the unit.
EN-35
o o
F, 0-45 C). A