Split Phase Function - Bluetti EP500 Bedienungsanleitung

Just Power On
10.2.4. Customized UPS
• Charge/Discharge time, and High/Low Battery SOC can be set in this UPS mode.
• Ability to disable the grid charging. The unit will not charge batteries from grid.
• Apart from Time Control UPS, the main switch of grid charging and time mode
settings are involved. The setting of turning the grid/time setting ON/OFF will
take effect on both PV Priority Mode, Standard UPS Mode, and Time Control
Mode.

11. Split Phase Function

Note: (1) Please disconnect the AC charging cable for both EP500 units while
binding into split phase box.
(2) Certifcated Technician is required to build the split phase system to power
the Power Cabinet or Sub Panel.
EN-31