User Interface - Bluetti EP500 Bedienungsanleitung

Just Power On

07. User Interface

7.1. Home Page
Tip: The LCD display is a resistive touchscreen. It is recommended when operating
the touchscreen that you press lightly with the edge off your fingernail until it
"beeps" when it registers a press. (NOTE: Touchscreen sounds can be disabled in
the Settings menu).
a
b
c
d
a . Homepage
b . Settings
c . Data
d . Alarm
e . PV Charging Information
f . BMS Information
7.2. Settings
• You can customize the working mode of EP500 and tweak the equipment's
parameters such as language, voltage, frequency, current (UPS Grid-Tie Mode),
working type, date/time, etc.
• Click the Settings Button in the homepage to enter the setting interface.
7.2.1. AC Output Voltage & Frequency
• Below are a list of standard output voltages and frequencies for 5 regions. You
e f
h i
g . Date/Time
h . DC load Information
i . DC ON/OFF
j . AC ON/OFF
k . AC load Information
l . AC Charging Information
EN-13
g
l
k
j