Husqvarna FS 600 E Bedienungsanweisung Seite 18

7. Turn the water tap on the blade guard to adjust the
water supply.
To connect the external water supply
WARNING:
blade is slightly above the ground when you
turn the water tap to adjust the water.
1. Connect an external water hose to the water inlet
(A). Put the external water hose in the hose holder.
A
18
Make sure that the cutting
B
2. To start or stop the water, push the water valve (B)
or turn the water tap (C) on the blade guard.
3. To adjust the water supply, push the water valve or
turn the water tap on the blade guard.
To engage and disengage the parking
brakes
1. Disengage the parking brakes (A) to move the
product.
A
2. Engage the parking brakes (B) to hold the product in
position.
To start the product
WARNING:
blade is slightly above the ground.
C
B
Make sure that the cutting
1620 - 004 -