Safety; Safety Definitions; Work Area Safety; Electrical Safety - Husqvarna FS 600 E Bedienungsanweisung

This product complies with applicable EC
Directives.
This product conforms to the applicable
UK regulations.
The product or package of the product
is not domestic waste. Recycle it at an
approved disposal location for electrical
and electronic equipment.
Rating plate
1
4
5
7
8
15

Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.

General power tool safety warnings

WARNING:
instructions, illustrations and specifications
provided with this power tool. Failure to
6
2
3
6
12
9
10
13
14
11
Used if there is a risk of
Used if there is a risk of
Read all safety warnings,
1. Manufacturer
2. Manufacturer address
3. Scannable QR code
4. Type designation
5. Article number
6. Serial number
7. Product weight, kg
8. Date of manufacture, year/month
9. Voltage: 3-phase alternating current, V
10. Frequency, Hz
11. Rated current, A
12. Motor output, kW
13. Maximum blade diameter, mm
14. Maximum spindle speed, n/min
15. Additional information
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.

Safety

follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.

Work area safety

• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.

Electrical safety

• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs. Unmodified plugs and matching outlets will
reduce risk of electric shock.
1620 - 004 -