Troubleshooting - Husqvarna FS 600 E Bedienungsanweisung

3. Lubricate the bushings (B), on the left side and the
right side of the product. Use a grease gun.
B
4. Lubricate the axle (C) with a brush.
5. Lubricate the lubrication points of the lever for cutting
depth adjustment (D). Use a grease gun.
a) Lubricate the axle below the nut.
The product does not start
• Make sure that the power supply and the power
cords are not damaged.
24
D
C
B
A

Troubleshooting

b) Turn the cutting depth wheel clockwise and
counterclockwise again and again and lubricate
equally. Push the lever to lock the cutting depth
wheel.
• Examine the machine stop button, turn the button
clockwise to release the machine stop button.
• Examine the error indicator. Refer to
on page 25 .
Error indicator
1620 - 004 -