Functions - Sage Barista Express Impress SES876 Kurzanleitung

Functions

Filling the Water Tank
• Ensure the water filter is securely fitted inside
the water tank.
• Use the handle at the top of the water tank to
assist in lifting the water tank and away from
the machine.
• Fill the water tank with cold potable tap water up
to the MAX marking indicated on the side of the
water tank.
• Replace the water tank back on the machine,
pressing down to ensure that it is properly
positioned and attached to the machine.
NOTE
If the water level in the water tank is below the
minimum (MIN) marking, the espresso machine
will not operate.
Attaching the Hopper
• Insert the bean hopper into position on top of
the machine.
• Turn the dial to lock the hopper into place.
• Fill the hopper with fresh beans.
NOTE
The filter light flashes between single and
double basket size when the bean hopper
is not correctly locked into position.
Attaching the Drip Tray
• Place the drip tray grill on top of the drip tray.
• For machine in colour, attach the drip tray
protection guard cover on the drip tray.
• Slide the drip tray into the machine.
EN
9