Parkside PISG 100 A1 Bedienungs- Und Sicherheitshinweise Seite 11

DANGER FROM WELDING FUMES:
Inhalation of welding fumes can endanger health. Do not keep

your head in the fumes. Use the equipment in open areas.
Use extractors to remove the fumes.
DANGER FROM WELDING SPARKS:
Welding sparks can cause an explosion or fi re. Keep fl ammable

substances away from the welding location. Do not weld next to
fl ammable substances. Welding sparks can cause fi res. Keep a
fi re extinguisher close by and an observer should be present to
be able to use it immediately. Do not weld on drums or any other
closed containers.
DANGER FROM ARC BEAMS:
Arc beams can damage your eyes and injure your skin. Wear a

hat and safety goggles. Wear hearing protection and high, closed
shirt collars. Wear welding safety helmets and make sure you use
the appropriate fi lter settings. Wear complete body protection.
DANGER FROM ELECTROMAGNETIC FIELDS:
Welding current generates electromagnetic fi elds. Do not use if you

have a medical implant. Never wrap the welding cable around
your body. Guide welding cables together.
 Welding mask-specifi c safety instructions
With the help of a bright light source (e.g. lighter) always check

the proper functioning of the welding mask prior to starting with
any welding work.
Weld spatters can damage the protective screen.

Immediately replace damaged or scratched protective screens.
Immediately replace damaged or highly contaminated or splattered

components.
The device must only be operated by people over the age of 16.

Please familiarise yourself with the welding safety instructions.

Also refer to the safety instructions of your welder.
Always wear a welding mask while welding. If it is not used, you

could sustain severe lesions to the retina.
Always wear protective clothing during welding operations.

Never use the welding mask without the protective screen.

Regularly replace the protective screen to ensure good visibility

and fatigue-proof work.
GB/IE/NI 11