5.4 Calling up the
web user interface
It is possible to show status informa-
tion about the module via the network
and to make some settings. To access
the web user interface via the web
browser of a computer / tablet / smart-
phone, the IP address of the module is
required. The IP address can be found
in the menu "System settings" under
Network ➜ V iew settin g s
Enter the IP address of the module in
the address bar of the browser and
call up the web user interface (availa-
ble in English only). The module must
be connected to the network at that
moment. Three tabs are available:
"Status" (fig. 26), "Network" (fig. 27)
and "Update" (fig. 28). Select the cor-
responding tab to show information
or to make the desired setting.
36
.
㉖
㉗
㉘