Additional Settings Via The Menu "System Settings - Monacor PA-1200IRD Einbau- Und Bedienungsanleitung

5.3 Additional settings via the menu "System settings"

The settings that can be made via the setup wizard are also available via the corresponding menu
☞
items of the menu "System settings". This menu also provides additional setup and display op-
tions: table below.
The menu can be called up from any operating mode: Press the button MENU, turn the knob
CONTROL SELECT to select
MENU ITEMS
Equaliser
Network
Network wizard
PBC Wlan setup
View settin g s
Wlan re g ion
Manual settin g s
NetRemote PIN Setup
Network profile
Clear network settin g s
Keep network connected
34
System settin g s
FUNCTIONS
Sound adjustment
Equaliser
Normal *
Flat
Jazz
㉓
Rock
Movie
My EQ profile setup
Bass: 0
Treble: 0
㉔
Bass
Bass dB
0
㉕
When the low frequencies and high frequencies have been adjusted as desired, press the but-
ton BACK. The prompt
Save chan g es?
(fig. 23) will appear again. For the user-defined sound adjustment to take effect, select the
line and confirm.
My EQ
Network settings
Network scan
(same way as via the setup wizard:
Connection to the network via WPS method PBC
(same way as via the setup wizard:
Display of settings for current network connection
Selection of wireless LAN region
(same way as via the setup wizard:
Manual configuration
(same way as via the setup wizard:
Setting the PIN code for control via the app UNDOK™ :
Show / Delete the wireless LAN networks most recently used: The module will "remember"
the access data of the four wireless LAN networks to which it has been most recently connected
and will show a list of these networks (
module is not able to find the network most recently used, it will automatically search for a
different network from the list and establish a connection to this network. To remove networks
that are not used anymore from the list, turn the knob CONTROL SELECT to select the name
of the network and press the knob to delete the network.
Reset of all network settings
(to disconnect the network connection and to delete all network connection data)
Maintaining the network connection
(same way as via the setup wizard:
and press the knob to confirm your selection.
The current sound adjustment is marked with an asterisk
Select the sound adjustment desired and confirm. For a user-
defined sound adjustment, select and call up
.
setup
When
My EQ profile setup
is selected. Press the knob CONTROL SELECT. A submenu with
a setting scale will appear (fig. 25).
Turn the knob CONTROL SELECT to adjust the low frequencies
(Bass); then press the knob to return to the previous menu. Then
adjust the high frequencies (Treble).
will appear; confirm with
☞
chapter 5.2, step 6)
☞
chapter 5.2, step 7, fig. 20)
☞
chapter 5.2, step 5)
☞
chapter 5.2, step 6D)
will indicate the network currently being used). If the
*
☞
chapter 5.2, step 4)
My EQ profile
has been called up, the line
. The menu
YES Equaliser
☞
chapter 6.8.1
.
*
Bass