Features
Top Panel
1. Input Select: Turn these knobs to select the desired audio source for each channel:
•
Digital: When this option is selected, the audio source is the digital ins
•
Line: When this option is selected, the audio source is the line inputs
•
Phono: When this option is selected, the audio source is the phono inputs
•
USB: When this option is selected, the audio source is a computer connected to a
USB port
•
DVS: When this option is selected, the audio source is a computer connected to a
USB port while using control vinyl with a digital vinyl system
2. USB 1/2: When the Input Select knob is set to USB, use these switches to select USB
Port 1 or USB Port 2 as the source. When set to USB Port 1 (and with a computer
connected to that port), the channel will control the corresponding channel in your software.
3. Level: Turn these knobs to adjust the level of the pre-fader, pre-EQ audio signal for each
channel.
4. EQ (High, Mid, Low): Turn these knobs to boost or cut the high, mid-range, and low
frequencies for each channel. You can use the Utility menu to set the type of EQ, which
determines the minimum (cut) and maximum (boost) values (see
>
EQ).
6
Operation > Utility Menu