Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Features
Top Panel
25
26
26
29
29
11
32
33
31
30
30
1. Input Select: Turn these knobs to select the desired audio source for each channel:
•
Digital: When this option is selected, the audio source is the digital ins
•
Line: When this option is selected, the audio source is the line inputs
•
Phono: When this option is selected, the audio source is the phono inputs
•
USB: When this option is selected, the audio source is a computer connected to a USB port
•
DVS: When this option is selected, the audio source is a computer connected to a USB
port while using control vinyl with a digital vinyl system
2. USB 1/2: When the Input Select knob is set to USB, use these switches to select USB Port 1 or
USB Port 2 as the source. When a computer is connected to that port, the channel will control the
corresponding channel in your software.
3. Level: Turn these knobs to adjust the level of the pre-fader, pre-EQ audio signal for each channel.
4. EQ (High, Mid, Low): Turn these knobs to boost or cut the high, mid-range, and low frequencies
for each channel. You can use the Utility menu to set the type of EQ, which determines the
minimum (cut) and maximum (boost) values (see
5. Channel Level Meters: These LEDs display the audio signal level of each channel, pre-channel-
fader.
6. Channel Fader: Use these faders to adjust each channel's volume level.
6
2
2
1
1
3
27
4
5
5
28
4
4
9
8
8
10
10
7
7
12
12
6
6
13
13
15
2
2
22
1
1
3
3
3
24
4
4
4
5
5
21
4
4
4
4
4
4
8
8
20
10
10
19
7
7
18
12
12
17
6
6
16
13
13
14
15
Operation > Utility Menu >
23
49
46 47 48
21
34
40
39
41
38
42
43
44
45
37
35
36
EQ).
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
