Denon DJ X1800 PRIME Benutzerhandbuch Seite 5

Networking
You can use X1800 PRIME to network multiple compatible Denon DJ media players together, enabling them
to seamlessly share timing and BPM information with X1800 PRIME (to synchronize effect tempos) as well
as track and user profile data with other media players.
This feature provides many advantages while performing. For instance, if you are using four compatible
Denon DJ media players, you can use one of them to browse through all tracks on all devices (USB drives
or SD cards) connected to any of those media players. You can then play any of those tracks immediately
without having to move a device from one unit to the other.
To network compatible Denon DJ media players together, use the included networking cables to
connect each of their Link ports to a Link port (1–4) on the rear panel of your X1800 PRIME.
The Network (Media Status) light on each media player will turn on when it is properly connected to a
network.
By default, X1800 PRIME is set to detect and configure each compatible Denon DJ media player
automatically once you connect their Link ports. The Link port on X1800 PRIME will determine which
channels that media player uses. See the scenarios below.
You can also freely assign each media player layer to a specific channel by changing the Engine Connect
setting on X1800 PRIME.
When your media player is connected to Link
Port 1 on X1800 PRIME, Layer A will use
Channel 1, and Layer B will use Channel 2.
When your media player is connected to Link
Port 3 on X1800 PRIME, Layer A will use
Channel 3, and Layer B will use Channel 4.
Layer Layer
A B
Layer Layer
A
When your media player is connected to Link
Port 2 on X1800 PRIME, Layer A will use
Channel 2, and Layer B will use Channel 1.
B
When your media player is connected to Link
Port 4 on X1800 PRIME, Layer A will use
Channel 4, and Layer B will use Channel 3.
Layer Layer
B A
Layer Layer
B A
5