Introduction; Device Description; Scope Of Delivery - Scheppach PHT600 Original Bedienungsanleitung

1. Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no
liability for damage to the device or caused by the
device arising from:
• Improper handling,
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
Please consider:
Read through the complete text in the operating man-
ual before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advan-
tage of its application possibilities in accordance with
the recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the de-
vice, for avoiding danger, for minimising repair costs
and downtimes, and for increasing the reliability and
extending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual package with the ma-
chine at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your coun-
try, the generally recognised technical rules relating
to the operation of such machines must also be ob-
served.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1)
1. Cutting blade
2. Hand guard
3. Front handle
4. Start lever (choke)
5. Starter cable
6. On/off switch
7. Throttle interlock
8. Air filter cover
9. Wing screw
10. Gear grease screw
11. Fuel pump
12. Tank cover
13. Slider
14. Throttle
15. Rear handle
16. Spark plug connector
17. Blade guard
18. Allen key size 5
19. Allen key size 4
20. Open-ended spanner size 8+10
21. Spark plug wrench
22. Oil-petrol mixing bottle

3. Scope of delivery

Open the packaging and carefully remove the device
from the packaging.
Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
Check whether the scope of delivery is complete.
Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be rec-
ognised.
If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of
the operating instructions before using for the first
time.
• With accessories as well as wearing parts and
replacement parts use only original parts. Spare
parts can be obtained from your -specialist dealer.
• When ordering please provide our article number
as well as type and year of manufacture for your
equipment.
m Attention!
The device and the packaging material are not chil-
dren's toys! Do not let children play with plastic bags,
films or small parts! There is a danger of choking or
suffocating!
Petrol hedge trimmer
Blade guard (17)
Spark plug wrench (21)
www.scheppach.com
GB | 21