HOMCOM 800-139 Bedienungsanleitung Seite 4

GETTING TO KNOW YOUR UNIT
1. Control panel:
A. Timer/clean button
Press this button once to enter the 'Timer'. Hold the button for longer than
five seconds to enter the cleaning programme.
B. ON/OFF button
Press this button to switch on the unit.
When the unit is making ice cubes, hold the button for longer than five
seconds to switch to the ice harvesting process.
C. LCD Display window
1.The display will show 'M', for the ice making countdown. The display will show
'℃' for the ambient temperature.
2.Ice cube symbol: The symbol will rotate when making ice cubes.
3.Automatic self-cleaning sign.
4.ON/OFF sign.
5.Error code E1- There is a fault with the ambient temperature sensor .E2-
There is a fault with the water temperature sensor.
E- The ice making machine or the refrigerant is leaking.
6.'Lack of water' warning sign.
7.'Ice full' warning sign.
8.Time setting display. When the display shows 'H', press 'ON/OFF'.
When the display shows 'M', set the timer for the ice making cycle.
D. Decrease the ice making time.
E. Increase the ice making time.
2.Ice basket
3. Evaporator
4. Water separator pipe
5. Unit top cover
6. Cover for the water reservoir
7. Support seat for a water bottle
8. Hot air outlet
9. Water draining cap: To drain the water from unit
10. Ice scoop
⑤ ⑥ ⑦ ⑧ ⑨
④
③
②
①
EN
⑩
3
A
B C D E
1 2 3 4
7 6 5
8