Noise/Vibration Information - Würth ETS 150-2.5-E Compact Originalbetriebsanleitung

In all correspondence and spare parts orders, please
always include the article number given on the type
plate of the machine.
The current spare parts list for this power tool can be
viewed in the Internet under
"http://www.wuerth.com/partsmanager"
or be requested from your next Würth branch office.

Noise/Vibration Information

Measured sound values determined according to
EN 62841-2-4.
Typically the A-weighted noise levels of the product
are: Sound pressure level 71 dB(A); Sound power
level 82 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Overall vibrational values (vector sum of three direc-
tions) determined according to EN 62841-2-4:
Vibrational emission value a
2
K=1,5 m/s .
The vibration emission level given in this manual has
been measured in accordance with a standardised test
and may be used to compare one tool with another. It
may be used for a preliminary assessment of the vibra-
tional impact.
The declared vibration emission level represents the
main applications of the power tool. However, if the
power tool is used for other applications with different
accessories or poorly maintained, the vibration emis-
sion may differ. This may significantly increase the
vibrational impact over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool is
switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the oper-
ator from the effects of vibration such as: Maintain the
power tool and the accessories, keep the hands warm,
organisation of work patterns.
Guarantee
For this Würth power tool, we provide a guarantee in
accordance with the legal/country-specific regulations
from the date of purchase (verified by invoice or deliv-
ery document). Damage that has occurred will be cor-
rected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
2
=1,77 m/s , uncertainty
h
Claims can only be accepted if the power tool is sent
undisassembled to a Würth branch office, your Würth
sales representative or a customer service agent for
Würth compressed-air and power tools.
Disposal
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Do not dispose of power tools into household waste!
Only for EC countries:
According to the European Guideline
2012/19/EU for Waste Electrical and
Electronic Equipment and its implemen-
tation into national right, power tools
that are no longer usable must be col-
lected separately and disposed of in an environmen-
tally correct manner.
Subject to change without notice.
9