Technical Data; Noise /Vibration Information - Würth EWS 8-125 LIGHT Originalbetriebsanleitung

Art.
Rated power consumption
Power output
No-load speed
Grinding wheel dia., max.
Spindle thread
Length of grinding spindle
Max. permissible thickness of the attachment
Max. permissible thickness of the attachment in the
clamping area when using a clamping nut
Weight without mains lead
Protection class
Symbols on the name plate:
Noise emission values
These values enable the estimating of the noise emissions of the power tool and comparison with various
power tools. Dependent on the conditions of use, state of the power tool or attachments, the actual loading
may be greater or smaller. When estimating also take into consideration work breaks and phases with lower
loading. Specify protective or organisational measures for the user based on the corresponding adjusted
estimation values.
Art.
a /K *
h, SG h, SG
a /K *
h, DS h, DS
L /K
pA pA
L /K
WA WA
Vibration total value (vector sum in three directions)
measured in accordance with EN 60745:
a , = Vibration emission value (surface grinding)
h SG
a , = Vibration emission value (grinding with grinding disc)
h DS
K = Uncertainty (vibration)
h, SG/DS
* The specified vibration emission values:
• Were measured using a standardised test method and can be used to compare one electric tool with
another.
• Can be used for a rough assessment of the exposure.
The noise level may exceed 80 dB(A) during work.
Risk of severe injuries and acoustic trauma.
Â
Wear ear protectors!
¾
20

Technical Data

(rpm)
n = max. no-load speed
∼ = Alternating current

Noise /vibration information

WARNING !
5707 010 X
(W) 820
(W) 510
11,000
(mm) 115
M14
(mm) 16.5
(mm) 6
(mm) 6
(kg) 1.6
/II
5707 010 X
m/s 8/1.5
2
m/s 4 /1.5
2
85/3
dB (A)
96/3
dB (A)
Typical A-rated sound pressure level:
L = Sound pressure level
pA
L = Sound power level
WA
K ,K = Uncertainty
pA WA
5707 020 X
820
510
10,000
125
M14
16.5
6
6
1.7
/II
5707 020 X
8/1.5
4/1.5
85/3
96/3