Maintenance And Cleaning; Warranty; Noise/Vibration Information - Würth 0702 445 Serie Originalbetriebsanleitung

EWS 24.book Seite 20 Dienstag, 29. Oktober 2019 10:09 10

Maintenance and Cleaning

Disconnect the mains plug from electric supply.
For safe and proper working, always keep the
machine and its ventilation slots clean.
Please store and handle the accessory(-ies) care-
fully.
In extreme working conditions, conductive
dust can accumulate in the interior of the
machine when working with metal. The pro-
tective insulation of the machine can be
degraded. The use of a stationary extraction
system is recommended in such cases as well
as frequently blowing out the ventilation slots
and installing a residual current device (RCD).
Occasionally blow out the pressed release button 6
in all three handle positions.
On machines with a disc brake, also replace the
brake lining when replacing the carbon brushes.
If the machine should fail despite the care taken in
manufacturing and testing, repair should be carried
out by a Würth Master-Service agent.
For all correspondence and spare parts orders,
always include the article number on the type plate
of the machine.
For the current spare parts list of this machine, log
into the Internet under "http://www.wuerth.com/
partsmanager" or ask for a copy at your nearest
Würth branch office.
Disposal
Power tools, accessories and packaging should be
disposed of for recycling in an environmentally
friendly manner.
Only for EU countries
Do not dispose of power tools into
household waste!
According to the European Guide
Lines 2012/19/EC for waste electric
and electronic equipment and its implementation
into national law, power tools that are no longer
usable must be collected separately and recycled in
an environmentally friendly manner.
Würth will gladly take back your defective Würth
power tool free of charge.
20

Warranty

For this Würth machine, we provide a warranty in ac-
cordance with statutory/country-specific regulations
from the date of purchase (proof of purchase by invoice
or delivery note). Damage that has occurred will be cor-
rected by replacement or repair.
Damage caused by normal wear, overloading or im-
proper handling is excluded from the warranty.
Claims can be accepted only when the machine is pre-
sented undisassembled to a Würth branch office, your
Würth sales representative or a customer service agent
for Würth power tools.

Noise/Vibration Information

Measured values determined
EN 60 745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level: 94 dB (A); Sound power level:
105 dB (A). Uncertainty K = 3 dB.
Wear ear protection!
Overall vibrational values (vector sum of three direc-
tions) determined according to EN 60 745.
Grinding of surfaces: Vibrational emission value
2
=6.0 m/s . Uncertainty K = 1.5 m/s
h,SG
Sanding with backing pad: Vibrational emission
2
value =6.0 m/s . Uncertainty K = 1.5 m/s
h,DS
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of the vibrational
impact.
The declared vibration emission level represents the
main applications of the power tool. However if the
power tool is used for other applications, with differ-
ent accessories or poorly maintained, the vibration
emission may differ. This may significantly increase
the vibrational impact over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: Main-
tain the power tool and the accessories, keep the
hands warm, organisation of work patterns.
according to
2
2