Specifications - Kenwood KMM-BT408DAB Bedienungsanleitung

Troubleshooting
Symptom
The connected Bluetooth • Check whether the connected Bluetooth audio player
audio player cannot be
controlled.
• Disconnect and connect the Bluetooth player again.
"NOT SUPPORT"
"NO ENTRY"
"ERROR"
"NO INFO"/"NO DATA"
"HF ERROR XX"/
"BT ERROR"
"SWITCHING NG"
The Bluetooth connection
between the Bluetooth device
and the unit is unstable.
Remedy
supports Audio/Video Remote Control Profile (AVRCP).
(Refer to the instructions of your audio player.)
The connected phone does not support Voice Recognition
feature or phonebook transfer.
There is no registered device connected/found via
Bluetooth.
Try the operation again. If "ERROR" appears again, check
if the device supports the function you have tried.
Bluetooth device cannot get the contact information.
Reset the unit and try the operation again. If this does not
solve the problem, consult your nearest service center.
The connected phones might not support phone
switching feature.
Delete the unused registered Bluetooth device from the
unit. (Page 17)

Specifications

DAB Frequency Range
Sensitivity
Signal-to-Noise Ratio
Antenna Connector Type
Antenna Output Voltage
Antenna Maximum Current
FM Frequency Range
Usable Sensitivity
(S/N = 30 dB)
Quieting Sensitivity
(DIN S/N = 46 dB)
Frequency Response
(±3.0 dB)
Signal-to-Noise Ratio (MONO) 68.0 dB
Stereo Separation (1 kHz)
MW Frequency Range
(AM)
Usable Sensitivity
(S/N = 20 dB)
LW Frequency Range
Usable Sensitivity
(S/N = 20 dB)
Band III:
174.928 MHz — 239.200 MHz
–100 dBm
90 dB
SMB
12 V DC
< 100 mA
87.5 MHz — 108.0 MHz (50 kHz step)
6.2 dBf (0.56 μV/75 Ω)
15.2 dBf (1.58 μV/75 Ω)
30 Hz — 15 kHz
40 dB
531 kHz — 1 611 kHz (9 kHz step)
28.5 μV
153 kHz — 279 kHz (9 kHz step)
45 μV
ENGLISH
33