Kenwood Remote Application; Bluetooth; Bluetooth - Connection - Kenwood KMM-BT408DAB Bedienungsanleitung

KENWOOD Remote Application

You can control the KENWOOD car receiver from Android device (via
Bluetooth) using KENWOOD Remote application.
• For more information, visit <https://www.kenwood.com/cs/ce/>.
Preparation:
Install the latest version of KENWOOD Remote application on your device
before connecting.
Start using KENWOOD Remote application
1
Start up the KENWOOD Remote application on your device.
2
Connect your device.
Pair the Android device with this unit via Bluetooth. (Page 14)
3
Select the device to use from the [FUNCTION] menu.
See the following "Settings to use KENWOOD Remote application".
Settings to use KENWOOD Remote application
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated.
4
Press and hold to exit.
To return to the previous setting item, press
[REMOTE APP]
[ANDROID LIST] Selects the Android device to use from the list.
[STATUS] Shows the status of the selected device.
[ANDROID CONNECTED]: You are able to use the application using the
Android device connected via Bluetooth.
[ANDROID NOT CONNECTED]: No Android device is connected to use the
application.
Bluetooth®
• Depending on the Bluetooth version, operating system and the firmware
• Be sure to turn on the Bluetooth function of the device to make the
• Signal conditions vary depending on the surroundings.
Bluetooth — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
Supported Bluetooth codecs
– Sub Band Codec (SBC)
Connect the microphone
.
Microphone
Default: [XX]
input jack
version of your mobile phone, Bluetooth features may not work with this
unit.
following operations.
Rear panel
Microphone
(supplied)
Adjust the
microphone angle
Secure using cord
clamps (not supplied)
if necessary.
13
ENGLISH