Specifications - Kenwood KDC-BT460U Bedienungsanleitung

Troubleshooting
Symptom
The connected Bluetooth • Check whether the connected Bluetooth audio player
audio player cannot be
controlled.
• Disconnect and connect the Bluetooth player again.
"NOT SUPPORT"
"NO ENTRY"
"ERROR"
"NO INFO"/"NO DATA"
"HF ERROR XX"/
"BT ERROR"
"SWITCHING NG"
The Bluetooth connection
between the Bluetooth device
and the unit is unstable.
28
ENGLISH
Remedy
supports Audio/Video Remote Control Profile (AVRCP).
(Refer to the instructions of your audio player.)
The connected phone does not support Voice Recognition
feature or phonebook transfer.
There is no registered device connected/found via
Bluetooth.
Try the operation again. If "ERROR" appears again, check
if the device supports the function you have tried.
Bluetooth device cannot get the contact information.
Reset the unit and try the operation again. If this does not
solve the problem, consult your nearest service center.
The connected phones might not support phone
switching feature.
Delete the unused registered Bluetooth device from the
unit. (Page 14)

Specifications

FM Frequency Range
Usable Sensitivity (S/N = 30 dB)
Quieting Sensitivity
(DIN S/N = 46 dB)
Frequency Response (±3 dB)
Signal-to-Noise Ratio (MONO)
Stereo Separation (1 kHz)
MW Frequency Range
(AM)
Usable Sensitivity (S/N = 20 dB)
LW Frequency Range
(AM)
Usable Sensitivity (S/N = 20 dB)
Laser Diode
Digital Filter (D/A)
Spindle Speed
Wow & Flutter
Frequency Response (±1 dB)
Total Harmonic Distortion (1 kHz)
Signal-to-Noise Ratio (1 kHz)
Dynamic Range
Channel Separation
MP3 Decode
WMA Decode
87.5 MHz — 108.0 MHz (50 kHz step)
0.71 μV/75 Ω
2.0 μV/75 Ω
30 Hz — 15 kHz
64.0 dB
40 dB
531 kHz — 1 611 kHz (9 kHz step)
28.2 μV
153 kHz — 279 kHz (9 kHz step)
50 μV
GaAIAs
8 times over sampling
500 rpm — 200 rpm (CLV)
Below measurable limit
20 Hz — 20 kHz
0.02 %
94 dB
91 dB
86 dB
Compliant with MPEG-1/2 Audio Layer-3
Compliant with Windows Media Audio