Specifications - Kenwood KDC-BT960DAB Bedienungsanleitung

Troubleshooting
Symptom
Not able to connect or • Be sure the audio device is connected via Bluetooth.
reconnect to Alexa mobile
application.
• Perform the one-time setup process again. See "Setup for
• Turn off, then turn on the unit and try to connect again.
• For iOS device, make sure ALEXA source or iPod BT source
Not able to exit from
"TALKING" screen after
ending the call.
Not able to go to • Disconnect and connect the Bluetooth connection again.
"LISTENING" screen after
activated Alexa. • Disconnect and connect the Alexa connection again.
• Turn off the unit for about 10 seconds, then turn on the
Remedy
Select the audio device from [AUDIO SELECT] in
[BT MODE]. (Page 19)
the first time" on page 21.
is selected.
It may take some time for the unit to exit the "TALKING"
screen. Press number button 6 to return to the previous
source control screen.
(Page 16)
(Page 21)
unit and try again.

Specifications

DAB Frequency Range
Sensitivity
Signal-to-Noise Ratio
Antenna Connector Type
Antenna Output Voltage
Antenna Maximum Current
FM Frequency Range
Usable Sensitivity
(S/N = 30 dB)
Quieting Sensitivity
(DIN S/N = 46 dB)
Frequency Response
(±3.0 dB)
Signal-to-Noise Ratio (MONO) 68.0 dB
Stereo Separation (1 kHz)
MW Frequency Range
(AM)
Usable Sensitivity
(S/N = 20 dB)
LW Frequency Range
Usable Sensitivity
(S/N = 20 dB)
Band III:
174.928 MHz — 239.200 MHz
–100 dBm
90 dB
SMB
12 V DC
< 100 mA
87.5 MHz — 108.0 MHz (50 kHz step)
6.2 dBf (0.56 μV/75 Ω)
15.2 dBf (1.58 μV/75 Ω)
30 Hz — 15 kHz
40 dB
531 kHz — 1 611 kHz (9 kHz step)
28.5 μV
153 kHz — 279 kHz (9 kHz step)
45 μV
ENGLISH
41