Audio Settings - Kenwood KMM-BT408DAB Bedienungsanleitung

Bluetooth®
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
Listen to the audio player via Bluetooth
Press B SRC repeatedly to select BT AUDIO.
1
• Pressing enters BT AUDIO directly.
2 Operate the audio player via Bluetooth to start playback.
To
Play back/pause
Select group or folder
Reverse skip/Forward skip
Reverse/Fast-forward
Repeat play
Random play
Select a file from a folder/list
Switch between connected
Bluetooth audio devices
18
ENGLISH
On the faceplate
Press 6 IW.
Press 2 / 1 .
Press S / T.
Press and hold S / T.
Press 4 repeatedly.
[ALL REPEAT], [FILE REPEAT], [GROUP REPEAT],
[REPEAT OFF]
Press and hold 3 to select [ALL RANDOM]
or [GROUP RANDOM].
• Press 3 to select [RANDOM OFF].
Refer to "Select a file to play" on page 12.
Press 5.
(Pressing the "Play" key on the connected
device itself also causes switching of sound
output from the device.)

Audio Settings

1 Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated.
4
Press and hold to exit.
To return to the previous setting item, press
[AUDIO CONTROL]
[SUB-W LEVEL] [LEVEL –50] to [LEVEL +10] ([LEVEL 0]): Adjusts the subwoofer
output level.
[EASY EQ] Adjusts your own sound settings.
• The settings are stored to [USER] in [PRESET EQ].
• The settings made may affect the current settings of [MANUAL EQ].
[SW]: [LEVEL –50] to [LEVEL +10]
[BASS]: [LEVEL –9] to [LEVEL +9]
[MID]: [LEVEL –9] to [LEVEL +9]
[TRE]: [LEVEL –9] to [LEVEL +9]
.
Default: [XX]
(Default: [LEVEL 0]
[LEVEL 0]
[LEVEL 0]
[LEVEL 0])