Firmware Upgrade; Restoring The Factory Settings - axing EOC 1-32 Betriebsanleitung

Operation instructions | EOC 1-32 and EOC 2-32 | Ethernet over Coax Peer to Peer

5.10. Firmware Upgrade

Firmware version
The current version of the firmware can be found in the Information window (see 5.2 on page 13).
Download of the file
You can find firmware updates for download by entering the article in the search field on www.axing.com.
On the product page you will find the current firmware in the Downloads tab.
 Download the file to your computer and unpack it.
Upgrade of the Firmware
 Click on Upgrade in the navigation on the right.
 Click Browse ... and select the upgrade file.
 Click Start.
The firmware/the driver file is loaded into the EOC and the device is restarted.
The new firmware will be activated immediately after restarting the EOC.

5.11. Restoring the factory settings

 Press the reset button R on the back of the device for a few seconds until the LEDs start flashing.
All configuration settings made are reset to the factory settings.
Page 22 of 26 AXING-BA_EOC-1-2-32.pdf | Technical improvements, changes in design, printing and other errors reserved. | 2022-08-16