BestWater Jungbrunnen 25-00 ULTIMATE Gebrauchsanleitung Seite 54

EN
continues to run until you press the
hot water button again and thus stop
the water flow.
When you press the
will cause the unit to beep twice in quick
succession and the unit's protection me-
chanism will be deactivated for a few se-
conds.
Now you can press the
button. The unit now conveys the ultra-
pure water through the cooling element
and discharges it at the tap. The water
continues to run until you tap the
cold water again and thus stop the wa-
ter flow.
Tapping bubbled water
When you the
cause the unit to beep twice in quick suc-
cession and the unit's protection mecha-
nism will be disabled for a few seconds.
Now you can press the
water button. The system now trans-
ports the ultrapure water through the
system and adds CO
is then discharged at the extraction tap.
The water will continue to flow until you
press the
again to stop the water flow.
After you have followed all the steps up
to this point, you can use your Jungbrun-
nen 25-00 ULTIMATE in everyday life.
Only observe the maintenance intervals.
The semi-annual maintenance is due af-
ter 6 months after commissioning, the
annual maintenance after 12 months.
How to perform maintenance is descri-
bed in the following chapter.
The ideal line pressure for the BestWater
54
lock button. This
cold water
JUNGBRUNNEN 25-00
lock button. This will
carbonated
to the water, which
2
carbonated water button
unit is 4 bar.
Please always observe the time for the
filling process.