BestWater Jungbrunnen 25-00 ULTIMATE Gebrauchsanleitung Seite 48

Setting Up and Connecting
EN
Installing plug-in connectors
Insert the 1/4" plastic hoses into the
plug sockets of the Jungbrunnen 25-00
ULTIMATE one after another.
Installing waste water hose
Install water supply hose
48
JUNGBRUNNEN 25-00
Install CO2 hose
Once all plastic hoses have been
connected to the Jungbrunnen 25-00
ULTIMATE, insert the mains water hose
from the Jungbrunnen 22-00 ULTIMATE
into the 1/4" connector on the water
stopper.
Tap water hose installing
Drain hose is inserted from the system
into the drain clamp on the trap.
Push the plastic hose 30 mm into the
drain clamp connector.
Install the drain hose into the drain clamp
Ensure that the hoses have been inser-
ted deeply enough into the connectors
and are not buckled.Inspect all hose and
socket connections to make sure they
are properly sealed.