Electrical Connection - Armstrong HEP Optimo S Basic Original Einbau- Und Betriebsanleitung

9 electrical connection

Warning: Risk of death!
Improper installation and
improper electrical connection
can present a fatal hazard.
Hazards posed by electrical power
must be eliminated.
• Only have installation and electrical
connection performed by a specialist
and in line with the valid regulations (e.g.
IEC, VDE, etc.)!
• The current type and voltage must
correspond with the information on the type
plate.
• Observe the specifications of local energy
supplier!
• Observe accident prevention regulations!
• Never pull on the power cable
• Do not bend the cable
• Do not place any objects on the cable
• When using the pump in systems at
temperatures over 90 °C, use a connection
line that is suitably heat resistant.
• Hazards such as sharp edges and burrs arise
during installation.
• When transporting the pump, never hold it
by the power cable.
• The pump could cause an injury if it falls.
HEP Optimo S Basic
operating instruction
29