Safety Instructions; General; Identification Of Symbols In The Operating Instructions - Armstrong HEP Optimo S Basic Original Einbau- Und Betriebsanleitung

operating instruction
20

2 safety instructions

2.1 general

These installation and opera-
ting instructions are a part of
the product, and contain basic
information that must be ob-
served during installation, ope-
ration and maintenance. For
this reason, the installer and
specialist personnel or opera-
tors must read these instructi-
ons prior to set-up.
Please observe both the gene-
ral safety instructions listed
under section 2 and the special
safety instructions detailed in
the other sections.
A copy of the EC Declaration of
Conformity is provided with
these instructions. This decla-
ration shall be deemed void in
the event of a modification that
has not been agreed with us.
HEP Optimo S Basic
2.2 identification of notes in
the operating instructions
General hazard symbol
Warning! Danger of personal
injury! Observe the relevant
accident prevention
regulations.
Warning! Danger from
electrical voltage! Prevent
hazards arising from
electrical energy. Observe
the instructions in local or
general regulations (e.g. IEC,
VDE, etc.), and those of the
local energy supplier.