Inhaltsverzeichnis
Werbung
50
MITRE SAW MACHINE
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
CAUTION!
For your own safety, carefully read these
instructions for use before using the machine.
CONTENTS:
1. Machine information
2. Safety
3. Mounting accessories
4. Operation
5. Service & Maintenance
1. MACHINE INFORMATION
INTRODUCTION
The mitre saw machine is designed for sawing wood and
woody pieces of work.
TECHNICAL SPECIFICATION
Voltage
Power consumption
Revolutions, not under load
Saw blade dimensions
Max. saw capacity 90º
Max. saw capacity 45º
Weight
Lpa (sound pressure)
Lwa (acoustic capacity)
Vibration level
LIST OF PARTS
1. Handgrip with switch
2. Unlock button
3. Motor housing (carbon brush cover)
4. Blade protective cover
5. Cutting head unlock button
6. Extension pieces (left and right)
7. Clamp
8. Clamp holes
9. Knobs for setting the sawing angle
10. Saw blade lock
11. Rotary knob for mitre sawing
12. Dust bag
13. Stop
14. Screw
15. Saw blade bolt
16. Flange
17. Hood
18. Bolts (Allen key)
Ferm
Ferm
PACKAGE CONTENTS
1 Mitre saw
1 Dust bag
1 Clamp
2 Extension pieces + 2 clamps
4 Rubbers
1 Allen key
1 Key for changing the saw blade
1 Instructions for use
1 Safety instructions
1 Guarantee card
Check the machine, loose parts and accessories for any
transport damage.
2. SAFETY
When using the machine, always carefully follow
the safety precautions supplied and the safety
instructions given below.
LIST OF SYMBOLS
The following pictograms are used in these instructions
and on the machine itself:
CE Conforms to the applicable European safety
standards
Class II equipment – doubly insulated – the plug
does not have to be earthed
| 230 V~
Danger of bodily injury or material damage.
| 1400 W
| 4500/min
| 250 x 16 mm
Read the instructions
| 125 x 65 mm
| 85 x 40 mm
| 12 kg
Keep bystanders at a distance
| 92,0 dB(A)
| 105,0 dB(A)
| 1,72 m/s
2
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
Wear eye and ear protectors
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
BEFORE EACH USE OF THE SAW
Check the machine. If any part of the machine is missing,
bent or in any other way unusable, or when an electrical
defect occurs, turn the machine off and take the plug out
of the socket. Replace all missing, damaged or defective
parts before using the machine again.
To fix the saw blade in the slot and to prevent the piece
of work from moving, follow the instructions below.
•
Choose a suitable saw blade for the work. Use the
mitre saw only for sawing wood and wood
derivatives or light metal such as aluminium.
3
Werbung
Inhaltsverzeichnis
