SOLARWATT Vision 36M glass Montageanleitung Seite 21

• Please take care when handling and installing glass-glass modules. The edges
and especially the corners are sensitive to impact even though they are made of
high-quality hardened glass.
• Make sure that the plug-in connections are not located on a water-channeling surface
• The glass-glass modules should be clamped into position on the long side of modu-
les as a minimum. You should select a glass edge cover which ensures that glazing is
secured in place for the long term.
• Do not use any glues, adhesive tape, or seals to mount the laminates which come into
contact with the embedded material unless explicitly allowed by Solarwatt.
• Make sure that the laminate edges do not lie in accumulated water and are always
able to dry after exposure to rain or other water.
Subject to changes | © 2022 Solarwatt GmbH 21