Herunterladen Inhalt Inhalt Diese Seite drucken

Amputee Legrests (Optional); Sideguards; Standard Sideguard; Height And Depth-Adjustable Sideguards (Optional) - B+B Pyro Start Plus Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Pyro Start Plus:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Pyro Start Plus
Pyro Start Plus
| Lightweight wheelchair
| Lightweight wheelchair
Pyro Start Plus SL
Pyro Start Plus SL
| Special sizes
| Special sizes

5.4. Amputee legrests (optional)

2
Assemble, disassemble and swing them away as for the standard
legrests, adjust the lower leg length as described in Chapter 4.2.2
1
and the horizontal adjustment works as for the elevating legrests (see
Chapter 4.3.1):
11.

5.5. Sideguards

5.5.1. Standard sideguard

In order to be able to transfer more easily, both sideguards with
armrests can be swung backwards.
Pull the locking lever gently and at the same time, swing the
sideguard to the back (Fig. 11).
To lock the sideguard, flip it forwards and click it into place on the
armrest using gentle pressure.
The arm pads on the sideguards are fitted in the central position
when delivered.
They can be fitted in either the front or rear positions.
The sideguard can be height-adjusted in four steps, to do this
remove the screw under the armrest, mount the spacers in such
order reaching the desired height and re-tighten.
Never use the sideguards to carry the wheelchair!
60
60
To change seat, the legrest must be swung away
or removed. Never sit on the legrest. Risk of tipping
over!
When swinging the sideguards away, make sure
that clothing or other items cannot be trapped.
Before using for the first time, check that the
sideguards are firmly in place!
Lightweight wheelchair |
Lightweight wheelchair |
Special sizes |
Special sizes |
5.5.2. Height and depth-adjustable
sideguards (optional)
As an option, your wheelchair can be fitted with height and depth-
adjustable sideguards. The sideguard can be removed and swung away.

Height adjustment

Pull the locking lever to move the armrest to the required position
(Fig. 12).
When you have reached the position required, then release the
lever. The lock clicks into place.
The height has been correctly selected if the upper arm and forearm
are approximately at right angles to one another when the forearm
is resting on the armrest.
Depth adjustment
Press the knob on the side of the armrest and push the armrest to
the required position (Fig. 13).
Release the knob and move the armrest gently forwards or
backwards until it clicks into place.

5.6. Backrest height

The Pyro Start Plus SL backrest is height adjustable
Adjusting the backrest height must only be carried
out by trained personnel.
Bischoff & Bischoff GmbH |2022-07-20- Revision: 2
Pyro Start Plus
Pyro Start Plus
Pyro Start SL Plus
Pyro Start SL Plus
2
1
12.
2
1
2
13.
61
61

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Pyro start plus sl

Inhaltsverzeichnis