Rearranging The Flue Pipe Connection - Austroflamm Clou Compact 2.0 Betriebsanleitung

Operating manual Clou Compact 2.0
9.2.3

Rearranging the flue pipe connection

Fig. 28: Removing the perforated cut-out
Fig. 29: Removing the cover
Fig. 30: Removing flue pipe bracket and
cover.
EN
1) First the cover must be removed and the side clad-
ding detached. Proceed as described in the section
Removing the side cladding [}on page 76].
2) Using a saw, remove the perforated cut-out to the side
cladding (rear).
3) Undo left and right screws and remove cover.
4) Remove flue pipe bracket (1) and cover (2).
1
2
9 | Installation
83