Residual Risks; Package Contents - DeWalt DW872 Originalanweisungen

EN GLI SH
• Use correctly sharpened saw blades. Observe
the maximum speed marked on the saw blade;
• Ensure that any spacers and spindle rings used
are suitable for the purpose as stated by the
manufacturer;
• Refrain from removing any cut-offs or other
parts of the workpiece from the cutting area
while the machine is running and the saw head
is not in the rest position;
• Ensure that the machine is always stable and
secure. (e.g. fixed to a bench)
• To support long pieces see figure C3.

Residual Risks

The following risks are inherent to the use of saws:
– injuries caused by touching the rotating parts
– injuries caused by disruption of the cutting
blade.
These risks are most evident:
– withing the range of operation
– within the range of the rotating machine parts
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing.
– Risk of accidents caused by the uncovered
parts of the rotating saw blade.
– Risk of injury when changing the blade.
– Risk of squeezing fingers when opening the
guards.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
DATE CODE POSITION (FIG. A)
The Date Code (z), which also includes the year of
manufacture, is printed into the housing.
Example:
2010 XX XX
Year of Manufacture
28

Package Contents

The package contains:
1 Toothed Chopsaw
1 Cutting blade
1 Hex key
1 Vertical clamp
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. A)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. On/off switch
b. Main handle
c. Carrying handle
d. Guard
e. Spindle lock
f. Material clamp
g. Fence
h. Mounting holes
i. Cutting table
j. Hex key
INTENDED USE
Your professional D WALT toothed chopsaw has
E
been designed for the cutting of variously shaped
metal materials: water and gas pipes, angular
iron, U-profiles, T-bars, rods, bolts, etc. Using the
appropriate cutting blade, it can cut hot and cold
rolled carbon steel, construction steels according
to DIN 1700 (ST33, ST37-2, ST52-3), non-ferrous
metals (i.e. aluminum, brass, copper), stainless
steel and synthetic materials (i.e. PVC). This tool is
not intended to be used in cast-iron, brick, tile or
ceramic materials. The tool is never to be used for
cutting magnesium work pieces.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These chopsaws are professional power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.