Zipro Dream Gold Bedienungsanleitung Seite 32

EN
Step 4
Fix the part of the right rail bracket (8) marked 'B'
to the hole marked 'C' in the right column (3). Fix
the part of the right rail bracket (8) marked 'A' to
the hole in the rail of the right main frame (43R)
with hexagonal bolts (67) and lock washers (91).
Repeat for the left side.
Set the main frame (4) angle so that the rail
brackets (8) and columns (3) were lined up
correctly. When done, tighten all parts.
Step 5
Attach the left and right lower protective
cover of the column (36L/R) to the lower
frame (1) and fix it with cross-head bolts
(88).
Attach the column side external cover
(34) to the side marked 'A' of the column
(3) and column side internal cover (35)
to the side marked 'B'. See the
instructions below.
Fix both covers (34 and 35) to the
columns (3) with cross-head bolts
ST4x12 (88).
Step 6
Insert the safety key (30) into
the computer to start
the operation of the treadmill.
Otherwise, the device will not work.
CAUTION! The safety key is intended
for immediate emergency stopping.
It is advisable to attach the key to your
clothes during every training
for safety purposes.
Congratulations! You have assembled the treadmill!
Read the manual carefully before using the treadmill.
32