Product Features; Noise/Vibration Information - Bosch GKS Professional 18 V Originalbetriebsanleitung

OBJ_BUCH-668-001.book Page 23 Wednesday, February 6, 2008 10:15 AM

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 On/Off switch
2 Safety switch for On/Off switching
3 Auxiliary handle
4 Spindle lock button
5 Scale for mitre angle
6 Allen key
7 Wing bolt for bevel-angle preselection
8 Wing bolt for parallel guide
9 Cutting mark, 45°
10 Cutting mark, 0°
11 Parallel guide
12 Retracting blade guard
13 Lever for retracting blade guard
14 Base plate
15 Wing bolt for bevel-angle preselection
16 Sawdust ejector
17 Blade guard
18 Battery unlocking button
19 Battery*
20 Clamping bolt with washer*
21 Clamping flange
22 Saw blade*
23 Mounting flange
24 Saw spindle
25 Extraction adapter*
26 Clamping lever for cutting-depth preselec-
tion
27 Cutting-depth scale
28 Set of screw clamps*
29 Guide rail*
30 Connection piece*
31 Vacuum hose*
32 Guide-rail adapter*
*The accessories illustrated or described are not in-
cluded as standard delivery.
Bosch Power Tools

Noise/Vibration Information

Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 95 dB(A);
Sound power level 106 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
2
tainty K =1.5 m/s .
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
English | 23
2
<2.5 m/s , Uncer-
1 609 929 N80 | (6.2.08)