Product Description And Specifications; Intended Use; Product Features - Bosch GCM 8 SJL Professional Originalbetriebsanleitung

OBJ_BUCH-1736-004.book Page 24 Friday, May 22, 2015 10:12 AM
24 | English
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more secure.
Symbols and their meaning
 Laser radiation
Do not view directly with optical in-
struments
Class 1M laser product
 Keep hands away from the cutting ar-
ea while the machine is running. Dan-
ger of injury when coming in contact with
the saw blade.
 Wear a dust respirator.
 Wear safety goggles.
 Wear ear protectors. Exposure to noise
can cause hearing loss.
 Danger area! Keep hands, fingers or
arms away from this area.
When sawing mitre/bevel angles, the ad-
justable fence must be pulled outward.
The free end of workpieces must be under-
laid or supported by the saw-table exten-
sions.
Observe the dimensions of the saw
blade. The hole diameter must
216 mm
Ø
match the tool spindle without play.
30 mm
Ø Do not use reducers or adapters.
1 609 92A 1CK | (22.5.15)
Symbols and their meaning
Clamping lever shut:
The set bevel angle of the tool arm
is locked.
Clamping lever open:
Adjusting bevel angles is possible.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in hard and soft-
wood, as well as in particle and fibre board. In this, mitre an-
gles from –52° to +60° as well as bevel angles from –2° to
+47° are possible.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Slide device
2 Chip ejector
3 Transport handle
4 Adjusting screw of depth stop
5 Laser protection cap
6 Roller
7 On/Off switch
8 Handle
9 Locking switch for releasing the tool arm
10 Blade guard
11 Retracting blade guard
12 Saw blade
13 Saw-table extension
14 Fence
15 Saw table
16 Clamping lever of the saw-table extension
17 Scale for mitre angle
18 Insert plate
19 Locking bracket
20 Locking knob for various mitre angles
21 Mitre detent lever
22 Tilt protector
23 Mitre angle indicator
24 Detents for standard mitre angles
Bosch Power Tools