Zipro Hulk Bedienungsanleitung Seite 26

EN
4. Install the handlebar
Run the heart rate measurement
cable through the handlebar column
(59) and through the computer
bracket opening.
Fix the handlebar (55) to the front
column (59) using hexagonal bolts
(54), flat washers (340).
Fix the handlebar cover (53).
5. Install the computer
Connect the heart rate measurement
cables (56) and the connecting cable
from the top of the handlebar column
(59) to computer cables (52).
Fix the computer (52) to the handlebar
column (59) using the bolts M5x10 (62)
and washers (61).
6. Install the water bottle holder
Install the water bottle holder (47) on
the handlebar column (59) using the
bolt (45) and the flat washer (46). Make
sure the holder is secure and insert the
bottle.
Congratulations! You have assembled elliptical trainer!
Read the manual carefully before using the elliptical trainer.
26