Inhaltsverzeichnis
Werbung
FRONT WHEEL AND REAR WHEEL
2
1
1 1
5 - 5
EC593000
REMOVAL POINTS
EC513201
Wheel bearing (if necessary)
1. Remove:
Bearing 1
G
NOTE:
Remove the bearing using a general bearing
puller 2 .
EC594000
INSPECTION
EC514100
Wheel
1. Measure:
Wheel runout
G
Out of limit → Repair/replace.
Wheel runout limit:
Radial 1 : 2.0 mm (0.08 in)
Lateral 2 : 2.0 mm (0.08 in)
Brake lining
1. Inspect:
Brake shoe lining surface
G
Glazed areas → Polish.
Use coarse sand paper.
NOTE:
After polishing, wipe the polished particles with
a cloth.
2. Measure:
Brake shoe lining thickness
G
Brake shoe lining thickness a :
Standard:
Front: 3.0 mm (0.12 in)
Rear: 4.0 mm (0.16 in)
Limit:
2.0 mm (0.08 in)
Out of specification → Replace.
NOTE:
Replace the brake shoes and springs as a set
if either is worn to the limit.
CHAS
Werbung
Inhaltsverzeichnis
