Inhaltsverzeichnis
Werbung
ENGINE OIL LEVEL INSPECTION
0
10
30
50
70
90 110 130
Å
-20 -10
0
10
20
30
40
ENGINE OIL LEVEL INSPECTION
1. Start the engine, warm it up for several
2. Place the machine on a level place and
3. Remove:
4. Check:
NOTE:
When inspecting the oil level, do not screw the
dipstick into the oil tank. Insert the gauge
lightly.
(For USA and CDN)
˚F
ı
50
˚C
CAUTION:
Do not add any chemical additives.
G
Engine oil also lubricates the clutch and
additives could cause clutch slippage.
Do not allow foreign material to enter the
G
crankcase.
3 - 5
minutes and wait for five minutes.
hold it up on upright position by placing
the suitable stand under the engine.
Dipstick 1
G
Oil level
G
Oil level should be between maximum
a and minimum b marks.
Oil level is low → Add oil to proper
level.
Recommended oil:
At –10 ˚C (10 ˚F) or higher Å:
Yamalube 4 (10W-30) or SAE
10W-30 type SE/SF motor oil
At 5 ˚C (40 ˚F) or higher ı:
Yamalube 4 (20W-40) or SAE
20W-40 type SE/SF motor oil
INSP
ADJ
Werbung
Inhaltsverzeichnis
