Troubleshooting Table - Privileg TC936T5Y-S00E Gebrauchsanleitung

Page EN-36

Troubleshooting table

Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, please check the tables to see if you can correct the
malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appliance yourself. You can put
your own and future users' lives in danger. Only authorised specialists are allowed to
carry out this repair work.
Problem Possible cause
Appliance will not No electricity to socket.
start, display is off.
Mains plug is loose.
Foreign bodies on the door
Cooking chamber seal faces.
door cannot be The cooking chamber's door
closed properly.
is broken or the door lock is
defective.
Cooking chamber
Lamp defective.
light not working.
Cooking chamber
door and/or Moisture is escaping from
viewing window the food; this is normal.
steams up.
The turntable is not correctly
positioned on the drive
The turntable does
not turn or does motor.
not turn properly. The cooking chamber floor
is dirty.
Turntable does not rotate
Scratching,
properly.
grinding sounds
The food dish is either
in the cooking
too large or is positioned
chamber.
incorrectly.
Exploding, The dish is being cooked
popping sounds and/or defrosted with too
in the cooking much power, and will burst
chamber. open.
Other noises or
flashes of light Sparks – metal objects in the
in the cooking cooking chamber!
chamber.
Solutions, tips
Check by connecting another appliance.
Check the tightness of the mains plug.
Clean the door seal faces thoroughly.
Do not use the appliance! Contact our
service team (see „Service" on page EN-38).
Contact our service team (see „Service" on
page EN-38).
Wipe up the moisture after operation.
Position the turntable correctly.
Clean the cooking chamber floor
thoroughly.
Insert the turntable correctly
The container may not protrude over the
edge of the turntable.
Cancel the setting and reselect a lower
power level.
Pull out the mains plug or isolate the fuse
immediately. Remove metal parts.