Safety Lock (Child Safety Lock); Clock; Changing The Time - Privileg TC936T5Y-S00E Gebrauchsanleitung

Page EN-18 General operating instructions
Cooking time can be set in the following in-
crements:
Range Steps
0–1 min 1 second
1–5 min 10 seconds
5–15 min 30 seconds
15–60 min 1 minute
from 60 min 5 minutes

Safety lock (child safety lock)

If the safety lock (child safety lock) is activat-
ed, the indicator (21) lights up on the display.
All sensors and the control dial can then no
longer be operated.
The safety lock can be activated only
when the appliance is not in opera-
tion.
Activating/deactivating the safety
lock
• Press the "Quick heating/safety lock" sen-
sor button (13) for approx. 3 seconds.
A beep will sound, and the indicator
will appear or disappear from the dis-
play (16).
(13) (16)

Clock

The integrated clock is used as a time indica-
Indicator
tor to automatically stop the cooking process
Minutes (min)
and as a timer ("egg timer").
Minutes (min)
The date is always shown in 24-hour format.
Minutes (min)
Following a power cut and during initial set-up,
Minutes (min)
the time
Hours (hr)
approx. 5 minutes.
• Set the clock to this time using the rotary
switch (20) and press the "Clock" sensor
button
The indicator stops flashing; the time has
been set.
and the time is set.
(21)

Changing the time

To change the time (e.g. when changing from
(21)
GMT to BST):
1. Press the "Clock" sensor button
the time indicator in the display (16) flashes.
2. Set the time using the rotary switch (20).
3. To finish, press the "Clock" sensor button
The indicator stops flashing; the time has
been set.
and the time is set.
flashes in the display (16) for
00: 0 0
(16) (17)
(17) to finish.
If the "Clock" sensor button
is not pressed, the time indicator
stops flashing after a few seconds
(17) again.
If the "Clock" sensor button
is not pressed, the time indicator
stops flashing after a few seconds
(20)
(17)
(17) until
(17)