Alarms List - Metos M145 Bedienungsanleitung

7 ALARMS LIST

1
THE FOLLOWING OPERATIONS SHOULD BE PERFORMED EXCLUSIVELY BY QUALIFIED AND AU-
THORISED PERSONNEL.
I
IN CASE OF INCORRECT OPERATION, IT IS RECOMMENDED TO DISCONNECT THE MACHINE FROM
THE ELECTRICAL AND HYDRAULIC SUPPLY NETWORK.
The illuminated button has a combination of white and red colours, which indicate the operating or alarm status,
which are summarised below:
(AL01) Alarm: cold cycle too long
(AL02) Alarm: cold cycles duration difference
(AL03) Alarm: no water (if sensor present)
(AL04) Alarm: ice bin probe faulty
(AL05) Routine maintenance request
(AL06) High temperature at condenser outlet
(AL07) Condenser probe alarm
(AL08) Evaporator probe (if present)
(AL09) Blackout - No power supply
(AL10) High pressure alarm
(AL12) Long defrost alarm
(AL13) Capacitative sensor
(AL14) Condenser cleaning
(AL15) Probe reversal
(AL16) IR probe faulty
Download HACCP data and update SW
Machine start-up phase
Ice production phase
Full bin
Standby
Ozone cycle phase
Gas filling phase (service)
OFF : LED / colour always OFF
ON : LED / colour always ON
flashing : LED / colour ON for 0.5s, OFF for 0.5s
•
71503175-0-000
Signal / Alarm
EN
RED WHITE
1 x 0.5" 1 x 3.0"
2 x 0.5" 1 x 3.0"
1 x 3.0" 1 x 0.5"
3 x 0.5" 1 x 3.0"
ON 3" ON 3"
ON OFF
4 x 0.5" 1 x 3.0"
5 x 0.5" 1 x 3.0"
OFF x 1.0" 1 x 5.0"
ON OFF
6 x 0.5" 1 x 3.0"
1 x 3.0" 3 x 0.5"
7 x 0.5" 1 x 3.0"
5 x 0.5" 2 x 0.5"
3 x 0.5" 1 x 3.0"
3 flash 3 flash
OFF 2Hz flash
OFF ON
OFF 10s flash
OFF 30s flash
OFF ON 1"
ON 1" ON 1"
13