Multi-Stage Cooking; Delayed Cooking - hanseatic AG720CGE-PM Gebrauchsanleitung

Operation

Multi-stage cooking

You can program the appliance to cook in two
stages – e.g. when you first wish to defrost a
dish at a high power then finish the cooking
process at a lower power.
NOTICE
Risk of damage to property!
The grill rack is not suitable for mul-
ti-stage cooking.
■ Use the grill rack exclusively in simple
grill mode.
If you wish to cook in multiple stag-
es, you cannot select an automatic
program.
Example: You want to initially defrost a dish
that you had frozen for 10 minutes, and then
complete the cooking process in 15 minutes
with 80% microwave power.
1. Press the "Defrost by weight/time" but-
ton (11) twice.
" " will appear on the display.
dEF2
2. Turn the control dial (14) until "
pears on the display.
3. Press the "Microwave/Grill/Combi" but-
ton (17).
" " flashes on the display.
P100
4. Press the "Microwave/Grill/Combi" but-
ton (17) once again.
5. The flashing display changes to "
6. Press the "Start/+30sec./Confirm" but-
ton (13).
" " stops flashing.
P80
7. Turn the control dial (14) until "
pears on the display.
8. Press the "Start/+30sec./Confirm" but-
ton (13).
The program begins.
The required defrosting time is counted
down in the display.
When the defrosting time has elapsed and
the cooking time begins, a short beep will
sound. 5 signal tones will sound once the
cooking time has elapsed.

Delayed cooking

With this function, you can set the cooking
process to start at a certain time.
CAUTION
Fire hazard!
Improper handling of the appliance can
lead to fi re and damage to property.
■ Do not leave the appliance unat-
tended during cooking. Keep children
away.
1. Place the dish in the cooking chamber.
2. Select the desired function as described
" ap-
10: 0 0
in section "Using the microwave oven" on
page EN-22 (multi-stage cooking is also
possible).
3. Set the cooking time as described in
section "Setting the cooking time" on
page EN-24.
4. Before you start cooking, press the "Time
".
P80
selection" button (16).
The hour counter will start flashing on the
display.
5. Set the hour of the desired start time us-
" ap-
15: 0 0
ing the control dial (14).
6. Press the "Time selection" but-
ton (16) again.
The minute counter will start flashing on
the display.
7. Set the minutes of the desired start time
using the control dial (14).
8. Press the "Start/+30sec./Confirm" but-
ton (13).
The current time will be shown on the dis-
play.
You can extend the defrosting time
and cooking time as described in
section "Extending the cooking
time" on page EN-23.
This function cannot be used with a
defrost or automatic program.
Page EN-27