Using The Automatic Programs; Query Capabilities; Displaying The Time - hanseatic AG720CGE-PM Gebrauchsanleitung

Page EN-28
The cooking process will begin automati-
cally at the set start time.
To delete the settings and interrupt the
cooking process, press the "Stop/Delete"
button (12).
Using the automatic
programs
The grill rack cannot be used for the
automatic programs.
The appliance has 8 automatic programs
which can be selected using the control
dial (14). The following table provides you
with a brief overview:
Program number
A 1
A 2
A 3
A 4
A 5
A 6
A 7
A 8
For all automatic programs, you can also se-
lect between several weights and/or sizes.
An overview of all selection options is provid-
ed by the "Cooking table for automatic pro-
grams" on page EN-30.
Example: You would like to cook 300 g veg-
etables.
1. Turn the control dial (14) clockwise until
" " starts to flash on the display.
A-2
2. Press the "Start/+30sec./Confirm" but-
ton (13).
" " stops flashing.
A-2
3. Turn the control dial (14) clockwise again
until " " appears on the display.
300
4. Press the "Start/+30sec./Confirm" but-
ton (13) again.
The cooking process will start.
Program description
Heating
Vegetables
Fish
Meat
Pasta
Potatoes
Pizza
Soup
The display counts down the remaining
cooking time in one-second increments.
5 beeps will sound once the cooking time
has expired.

Query capabilities

Displaying the power level
While cooking, you can view the power level
currently in use by tapping the "Microwave/
Grill/Combi" button (17).
Displaying the start time
When delayed cooking (see "Delayed cook-
ing" on page EN-27) is activated, you can
press the "Time selection" button (16) briefly
to display the program start time.

Displaying the time

The remaining cooking time is displayed
while cooking. To display the time press the
"Time/Timer" button (16) briefly.
The current time will be displayed for approx.
3 seconds.
Operation