Operation; Setting The Time; Switching On And Off The Security Locking Mechanism (Child Lock) - hanseatic AG720CGE-PM Gebrauchsanleitung

Operation

Operation

Setting the time

During start-up and after a power failure, you
will have to set the time. Otherwise the appli-
ance will not work.
The appliance is always in 24-hour
mode and can therefore not be
changed to 12-hour mode.
When the appliance is connected to
the power supply, a beep will sound and the
display will show .
0: 0 0
1. Press the "Time/Timer" button (16).
Both of the left digit displays will start flash-
ing on the display.
2. Turn the control dial (14) to set the num-
ber of hours.
3. Press the "Time/Timer" button (16) again.
Both of the right digit displays will start
flashing on the display.
4. Turn the control dial to set the minutes.
5. Press the "Time/Timer" button (16) once
again.
The digits in the display are no longer
flashing; the time is now set.
Switching on and off the
security locking mechanism
(child lock)
When the security locking mechanism is ac-
tivated, the display (10) will show a lock in-
dicator:
1. To switch on the security locking mech-
anism (child lock), press and hold down
the "Stop/Delete" button (12) for approx.
3 seconds.
A beep will sound and the display will show
the lock indicator. All of the buttons are now
disabled.
2. To switch off the security locking mech-
anism (child lock), press and hold down
the "Stop/Delete" button (12) again for
approx. 3 seconds.
A beep will sound and the time will show
in the display again instead of the lock in-
dicator.
Page EN-21