To Clean The Product - Husqvarna BMS 220 ADB Bedienungsanweisung

Maintenance
Do a check for oil leaks.
Do a check of the wear and function of the seat belt.
Use compressed air to clean the inner surface of the charger.
Do a check of the wear and function of the front wheels.
Replace the hydraulic oil. Refer to
Do a complete servicing and cleaning of the product.
To do a general inspection
• Make sure that the nuts and screws on the product
are tightened.
• Make sure that the cables on the product are not in a
position where they can become damaged.
• Examine the electrical parts for damage. Do not
operate a product that has damaged electrical parts.

To clean the product

• Always clean all the equipment after use. Use a
vacuum cleaner.
• Do not use a high-pressure washer to clean the
product.
• Keep the air openings clean and clear to make
sure that the product always has sufficiently cool
temperature.
To adjust the tracking
If the product does not move straight forward, the
tracking must be adjusted.
14
To replace the oil and oil filter on page 16 .
Daily
1. Remove the 2 screws and tilt the seat to the side.
Each
Week- 12
ly month
s
X
X
X
X
X
O
1813 - 001 - 11.05.2022
12 h
after
servic-
ing