Husqvarna BMS 220 ADB Bedienungsanweisung Seite 11

Note:
The product does not charge when the
ON/OFF key is in the ON position.
2. Connect the charger and keep the charger
connected until the next time you use the product.
To remove a soft floor surface
WARNING:
blades are very sharp.
Note:
Short blades cut the floors easier than long
blades. Long blades are not always better or faster. A
short blade usually cleans the floor better than a wide
blade.
Note:
The blades are sharp for a longer time if the
work area is clean from unwanted material.
1. Use personal protective equipment. Refer to
Personal protective equipment on page 6 .
2. Install a self scoring blade. Refer to
correct blade dimension and installation position on
page 9 and To replace the blade on page 15 .
WARNING:
The blades are very sharp.
3. Make sure that the blade is sharp. Sharpen the
blade if it is necessary. Refer to
blade on page 15 .
4. Cut a linear ditch in the floor.
5. Install a flat blade.
WARNING:
The blades are very sharp.
1813 - 001 - 11.05.2022
Use protective gloves. The
To select the
Use protective gloves.
To sharpen the
Use protective gloves.
6. Start at the ditch and remove the floor.
1
To remove a hard floor surface
WARNING:
blades are very sharp.
Note:
Short blades cut the floors easier than long
blades. Long blades are not always better or faster. A
short blade usually cleans the floor better than a wide
blade.
Note:
The blades are sharp for a longer time if the
work area is clean from unwanted material.
1. Use personal protective equipment. Refer to
Personal protective equipment on page 6 .
2. Install a short blade of the correct type. Refer to
select the correct blade dimension and installation
position on page 9 and To replace the blade on page
15 .
WARNING:
The blades are very sharp.
3. Make sure that the blade is sharp. Sharpen the
blade if it is necessary. Refer to
blade on page 15 .
2
Use protective gloves. The
Use protective gloves.
To sharpen the
To
11