Symbols On The Product - Husqvarna Soff-Cut 2000 Bedienungsanweisung

31. Battery box
32. Adapter for dust extractor connection
33. Operator's manual
34. Type plate

Symbols on the product

Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Read and understand the operator's
manual for the dust extractor.
Use hearing protection.
Use approved eye protection.
The dust can cause health problems. Use
an approved respiratory protection.
Use a protective helmet in locations where
objects can fall on you.
To lift the product, attach lifting equipment
to the lift point on the product.
793 - 001 - 19.04.2022
Release the handle to
lower the blade by gravi-
ty. To prevent damage to
the blade, hold the prod-
uct tightly and lower the
blade carefully.
Risk of injury and damage
to the product. Be careful
when you lift the product.
Remove the cutting blade
before you lift the product.
Belt entanglement hazard.
Keep hands and other
bodyparts clear from mov-
ing parts.
Machinery hazard. Risk of
cut injuries. Keep hands
and feet clear.
Do not use a combustion engine product
indoors or in areas that do not have
sufficient airflow. Do not breathe exhaust
fumes. The dust can cause health
problems. Use an approved respiratory
protection.
Keep all the guards in place.
Do not in flammable areas.
The arrow on the blade guard shows the
direction in which the blade rotate.
Fill engine oil to correct level.
Forward speed lever. Push the lever to
increase the speed. Pull the lever to
decrease the speed.
Pull the front pointer up.
Put the front pointer down.
OFF, stops the engine.
RUN, starts the ignition.
START, cranks the engine.
41