Ametek mocon Dansensor MAP Mix ProVectus Bedienungsanleitung Seite 43

Dansensor MAP Mix Provectus
®
Location Register read
0xA0D6 Output valve
mode
0xA035 "Mixer table 1"
offset
(read only)
0xA04B "Mixer table 2"
offset
(read only)
0xA009 Mixer table 1
(read only)
0xA01F Mixer table 2
(read only)
Write commands (W (Operational commands))
Location Register write Encoding
0x0000
0x0010 Mix 1 setting
DE
Encoding
1 byte unsigned
See also write 0x0066
0 = OFF, mixer is stopped
1 = Running (Auto). Normal operation mode.
Not used in MMP
Not used in MMP
Not used in MMP
Not used in MMP
1 unsigned byte
Range 0 to 100%
For a 3-gas mixer this controls the setting of "GAS 2 INPUT"
i.e. %CO
2
For a 3-gas mixer:
When writing new "Mix 1 setting" MAP mix 8000 will not
change "Mix 2 setting", and vice versa, if possible.
i.e. %O is increased/decreased to compensate for the
2
change in the new "Mix 1 setting" or "Mix 2 setting" setting.
If/when %O reach minimum % or 100%, when adjusting to a
2
new "Mix 1 setting", "Mix 2 setting"( %N
versa.
The sum of %N , %CO and %O
2 2
Bedienungsanleitung
) is changed and vice
2
is always 100
2
P/N 300863-H
12/2019
41